The Mustang II is a Mustang too!
- Posts:
- 47,821
- Group:
- Admin
- Member
- #1
- Joined:
- July 3, 2006
- DLM or Cardboard Collector
- DLM
- Gender
- Male
- Preferred Brand
- Yat Ming
- Location
- Pennsylvania
- Favorite Car
- Ford Mustang & Toyota Celica Supra
|

Today's Car Of The Day is Majorette's 2011 Eurocopter EC145.

- Wikipedia
-
The Eurocopter EC145 (now Airbus Helicopters H145) is a twin-engine light utility helicopter developed and manufactured by Eurocopter, which was rebranded as Airbus Helicopters in 2014. Originally referred to as the BK 117 C2, the EC145 is based upon the MBB/Kawasaki BK 117 C1, which became a part of the combined Eurocopter line-up in 1992 with the merger of Messerschmitt-Bölkow-Blohm's helicopter division of Daimler-Benz and the helicopter division of Aérospatiale-Matra to form Eurocopter.
The EC145 is a twin-engine aircraft and can carry up to nine passengers along with two crew, depending on customer configuration. The helicopter is marketed for passenger transport, corporate transport, emergency medical services (EMS), search and rescue, parapublic and utility roles. In 2014, the EC145 was rebranded as the H145 by Airbus Helicopters. Military variants of the helicopter have also been produced under various designations, such as H145M or UH-72, and have been used for training, logistics, medical evacuation, reconnaissance, light attack, and troop-transport operations.

For more information and pictures of the real car, please visit: Eurocopter EC145

Another nice helicopter from Majorette. Especially since it's a real copter.

- Wikipedia
-
The EC145 was a joint development between Eurocopter and Kawasaki Heavy Industries on the basis of their successful prior jointly produced BK 117 C1. Rather than pursuing an entirely clean sheet design, the forward cockpit and modern avionics of Eurocopter's EC 135 were adopted in combination with the proven BK 117's rear section; Flight International described the new helicopter, originally designed as BK 117 C2, as being "90% a combination of these two aircraft [The EC135 and BK 117 C1]". However, there were significant areas of redesign, advantages held by the EC145 over its predecessor include possessing a greater range and payload capacity, a considerably increased and uninterrupted cabin area, reduced vibration and noise emissions, and measures to simplify maintenance and minimize operational costs. The noise signature of the EC145 is reportedly 60% lower than that of the BK 117 C1.
The new model was type-certificated as the BK 117 C2; in December 1997, it was selected by the French Defense and Civil Guard for air rescue mission, 31 EC145s were ordered to replace their fleet of ageing Aérospatiale Alouette III in a deal costing $170 million. The first EC145 completed its maiden flight at Donauwörth, Germany on 12 June 1999; Eurocopter conducted a major publicity event for the emerging type at the US Helicopter Association International Show in February 2000. Safety certification of the EC145 was awarded by the German Luftfahrt-Bundesamt and Japanese Civil Aviation Bureau in December 2000; and by the United States Federal Aviation Administration (FAA) in early 2002.
Eurocopter and Kawasaki have an agreement under which both firms independently manufacture and market the rotorcraft, while working collaboratively on development and upgrades. Eurocopter has a 60% production workshare, which includes the main and tail rotors, intermediate and tail gearboxes, control systems, cockpit and tail structure, and landing gear; Kawasaki has a 40% workshare, comprising the fuselage structure, main transmission, electrical and fuel systems. Kawasaki uses the designation BK 117 C2 for the type and sells/produces the aircraft in the Asian market; Eurocopter sells the type globally under the EC145 designation. In November 2004, with the termination of production of Mitsubishi Heavy Industries' MH2000, the BK 117 C2 became the only civil helicopter in production in Japan. In August 2010, it was announced that the partnership between Eurocopter and Kawasaki on the development and production of the EC145 had been extended until at least 2025.
In 2011, Eurocopter officially launched an upgraded EC145 model, designated EC145 T2, unveiling the new type at Heli Expo 2011. The EC145 T2 is designed to significantly increase the aircraft's performance, featuring new Arriel 2E turboshaft engines, dual-digital Full Authority Digital Engine Controls (FADEC), Eurocopter's Fenestron shrouded tail rotor design, and upgraded tail and main rotor gear boxes. Considerable differences and improvements were introduced to the cockpit and aircraft subsystems, including the adoption of increasingly digital avionics and a fully modular approach to these systems; amongst the biggest changes is a sophisticated 4-axis autopilot. In April 2014, airworthiness certification from the European Aviation Safety Agency for the EC145 T2 was received, FAA certification followed in October 2014.
The primary manufacturing facility for the EC145 is located at Donauwörth in Germany, which is Eurocopter's second-largest site after Marignane in France. In 2014, Airbus Helicopters announced that 50 EC145 T2s would be manufactured in 2015; the production is expected to eventually rise to 70 helicopters per year.
Since 2011, Eurocopter has been developing an optionally piloted vehicle (OPV) variant of the EC145. Test flights of the EC145 OPV, including unmanned flights, began in 2013. The system, designed to plug into the EC145's existing avionics, is capable of autonomous operation or alternatively being controlled by human operators either via the cockpit or from a ground control station. The technology, which is reported to be compatible with a number of Eurocopter's range of helicopters, is intended for both civil and military applications. In an emergency situation, such as systems failure, the EC145 OPV is programmed to enter into an automated hover-to-land procedure to safely land the aircraft. In March 2015, Airbus Helicopter's Chief Technical Officer Jean-Brice Dumont stated that there were no firm plans for the EC145 OPV to proceed to production, but investment in the project was continuing.
In July 2014, Airbus Helicopter launched the EC145e, a lightened and lower cost version of the standard EC145, achieved by the removal of some avionics for autopilot and single-pilot IFR functions. Intended as a basic model for tasks such as aerial firefighting and utility work, it has been also viewed as a replacement for aging MBB Bo 105 rotorcraft. In April 2015, the EASA issued its certification for the EC145e. In 2015, Metro Aviation entered into an arrangement with Airbus Helicopters to offer various mission-specific customization for the EC145e and operate as a reseller for the variant.
The EC145 features a larger cabin space than the older BK 117 C1 helicopter with internal space increased by 46 cm (18 in) in length and 13 cm (5 in) in width, increasing cabin volume by 1.0 m³ (35 ft³) to 6.0 m³ (211 ft³). Other improvements over the BK 117 include an increased maximum take-off weight and greater range, achieved partially by the adoption of composite rotor blades, which were derived from the smaller EC135. The EC145 has a hingeless rotor system with a monolithic titanium hub; the helicopter was originally powered by a pair of Turboméca Arriel 1E2 turboshaft engines, later aircraft are powered by the upgraded Turboméca Arriel 2E engine. A key feature of the rotorcraft is the variable rotorspeed and torque matching system (VARTOMS), derived from the BK 117, which Eurocopter has attributed as making the EC145 "the quietest helicopter in its class".
The EC145 is fitted with an all-glass cockpit, consists of a Thales Avionics MEGHAS Flight Control Display System with active matrix liquid crystal displays (LCDs); it can be piloted by either one or two pilots. A number of systems are independently redundant, including the autopilot system, hydraulic boost, transmission lubrication, and some of the onboard sensors. The EC145 T2 features additional and newer avionics systems, such as a full 4-axis autopilot and dual-channel Full Authority Digital Engine Control (FADEC); three large LCD primary displays were also introduced to control these systems. The type is fully capable of Category A operations; in November 2008, an EC145 performed the first medical transport flights under instrument flight rules (IFR) in Europe; the type is able to fly entirely under GPS navigation from takeoff to final approach when required. The EC145 is also the first civil helicopter to be fitted with night vision-compatible cockpit instrumentation and lighting straight off the production line.
Typical cabin arrangements allows for eight passengers in a club seating configuration, or nine passengers in a high density seating configuration, passenger seating is designed for quick rearrangement based upon current demands. The cabin can be accessed either through sliding doors in either side of the aircraft or via large clamshell doors at the rear of the cabin; in combination with the high mounted tail boom, the clamshell doors are designed to provide safe clearance for loading and unloading activities even while the rotors are turning. In an EMS/casualty evacuation arrangement, the EC145 can carry up to two stretchered patients with three accompanying medical staff. The helicopter can be fitted with emergency floats, rescue hoist, search light, load hook and specialist equipment for other operational requirements.
A specialized VIP variant developed in association with Mercedes-Benz, known as the EC145 Mercedes-Benz Style, launched as an executive helicopter in 2010. Capable of transporting up to six passengers via switchable rail-mounted seating arrangements; the Mercedes-Benz variant features a luxury interior complete with leather seats, wooden paneling, advanced ambient lighting and in-flight entertainment systems, and modular storage cabinets; various aesthetic external changes, such as a reshaped forward section, also feature on this variant. Eurocopter also offers an 'EC145 Stylence' package to corporate and private helicopter operators, which has various aesthetic and technology changes from the baseline model to provide a higher level of passenger comfort. The EC135e, a utility variant, has a deliberately standardized interior for the purpose of minimizing overall weight.
- Attached to this post:
0602cotd1.jpg (189.82 KB) 0602cotd2.jpg (172.19 KB) 0602cotd3.jpg (197.4 KB) 0602cotd4.jpg (187.53 KB) 0602cotd5.jpg (182.71 KB) 0602cotd6.jpg (181.65 KB)
|